Flat wooden pallets are designed to form transport packets with the mechanized processes of movement, warehousing and transportation by road and rail.
For their manufacturing used softwood lumber, class 2, 3, 4.

During wooden pallets transportation by vehicles flat and lids to flat wooden pallets stacked in a pile. The height of a stack depends on the type of vehicle in which the pile will be transported to the consumer, as well as the method of forming a stack (with the coup pan at 180 ° or not) and must be within 1,3-1,5 m.

When forming the pile caps to the flat wooden pallets, lids (27 - 28 pcs.) Stacked on a pallet.

A pile of contracts to a number of polypropylene tapes near the middle support pallet.

In order to avoid bearing failure and damage to surfaces on the edges of package under the belt polypropylene tape, stacked plastic corners in amount of 2 pcs.

For tightening and consolidate all polypropylene tape used metal casing clamp.

The shape and size of the package should provide the mechanization of loading and unloading operations, as well as reliability and stability of the vehicle.